A major UK oil and gas operator required the tuning and optimisation of gas compressor anti-surge valves during a planned compressor outage.

A major oil and gas operator required specialist resources to mobilise to several of their offshore installations during an extended shutdown. This was to assist in the delivery of several...

The flare ignition system on a UK oil and gas installation had not been operational for several years requiring the flare to be ignited locally.

The process control system (PCS) of an offshore installation in the UK was communicating with the subsea Master Control Station (MCS) on a cyclic basis. This was causing unnecessary movement...

The process conditions at an offshore installation had changed significantly over the years and would continue to do so until the end of field life. To ensure stable control of...

Large parts of a F&G System on a UK offshore installation had been assessed as obsolete with limited options for technical support. An increase in failure rates for key components...

A major UK oil and gas operator required ongoing specialist control and safety system support for several offshore installations to ensure continued safe and efficient operations.

A major oil and gas operator requested an independent peer review of an ongoing Control and Safety System Upgrade project to assess the readiness for offshore execution.

Following a period of poor production up-time associated with the installed Integration Control and Shutdown System (ICSS), a major UK oil and gas operator initiated a series of studies to...

A major UK oil and gas operator have several centrifugal gas compressors that suffered from start-up sequence lockups or abortive starts, leading to significant production losses.

The gas flowrates at a North Sea offshore installation had changed significantly from the original design with the asset becoming gas deficient. As a result, the reliability of the gas...